Specifications

102 ExtremeWare XOS 10.1 Command Reference Guide
Commands for Managing the Switch
configure snmpv3 delete user
configure snmpv3 delete user [all-non-defaults | {hex} <user_name>]
Description
Deletes an existing SNMPv3 user.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to delete an existing user.
Use the all-non-defaults keyword to delete all users, except for the default (permanent) users. The
default user names are: admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv.
Deleting a user will not implicitly remove the related group to user association from the
VACMSecurityToGroupTable. To remove the association, use the following command:
configure snmpv3 delete group {{hex} <group_name>} user [all-non-defaults | {{hex}
<user_name> {sec-model [snmpv1|snmpv2c|usm]}}]
Example
The following command deletes all non-default users:
configure snmpv3 delete user all-non-defaults
The following command deletes the user guest:
configure snmpv3 delete user guest
all-non-defaults Specifies that all non-default (non-permanent) users are to be deleted.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
user_name Specifies the user name to add or to clone from.