Troubleshooting guide

Transceiver Diagnostics
Advanced System Diagnostics and Troubleshooting Guide 87
License: Full L3 + Security
...
SysHealth Check: Enabled. Alarm Level = Log
Recovery Mode: None
Transceiver Diag: Enabled. Failure action: sys-health-check
Fdb-Scan Diag: Enabled. Failure action: sys-health-check
System Watchdog: Enabled.
...
Transceiver Diagnostic Result Analysis
• If transceiver test error counters are incrementing, but there is no associated log message, the
problem is probably a transient problem. You should continue to monitor the counter.
• If transceiver test error counters are incrementing and there is a log message, you should perform
further analysis and diagnostics to isolate the problem.