Specifications

8 ExtremeWare 7.0 Release Notes
Incrementing the intfIf Value 57
WinSCP2 Not Supported 57
SNMP ifAdminStatus MIB Value 57
Trap Receivers as Broadcast Entry 57
Bridge MIB Attributes 57
SNMP Time-out Setting 58
SNMP Access Profile 58
SNMP and Auto-negotiation Settings 58
SNMP and the BGP MIB 58
SNMP and the FDB MIB 58
Extreme Fan Traps 58
Extreme Power Supply Traps 58
DHCP 58
Diagnostics and Troubleshooting 59
The show diagnostics backplane-utilization Command Available 59
Spurious Message When system-down is Configured 59
The use configuration Command 59
Output of the show diagnostics Command 59
Configure Auto-Recovery to online or Alarm-Level to traps 59
Error Count Not Accurate 59
Configuring Diagnostics Mode Off 59
Disable Remote Syslog Before Enabling IPARP Debug-Tracing 59
Rebooting Using SNMP or RMONII With Reboot Loop Protection 60
Configuring a New Threshold for Reboot Loop Protection 60
The card-down Option 60
Do Not Use a Count of One for Reboot Loop Protection 60
Documentation 60
Issues Resolved in ExtremeWare 7.0.1b11 60
General 60
BlackDiamond 60
Summit 61
Issues Resolved in ExtremeWare 7.0.0b68 61
BlackDiamond 61
Alpine 61
ESRP 61
Spanning Tree 61
QoS 61
IS-IS 62
Issues Resolved in ExtremeWare 7.0.0b61 62
General 62
BlackDiamond 62
Summit 63
IP Multicast Routing 63
RIP Routing 63
EAPS 63
FDB 64
BGP 64