Specifications

Issues Resolved in ExtremeWare 7.0.0b61
ExtremeWare 7.0 Release Notes 65
The slave ESRP VLAN no longer forwards traffic when the slave link transitions without an ESRP state
change (PD2-89481303).
If you create, delete, or modify a VLAN tag when there are 256,000 MAC address, you no longer receive
the following error message (PD2-90054207, PD2-90223201):
updateEdpFilter401: Unable to locate EDP MAC (VID=0xffd)
VLANs
You are no longer required to set the CPU-transmit-priority level to “normal” to configure more than
1024 VLANs (7120, 8908).
IS-IS
The show isis command now operates correctly with user accounts (PD2-92240902).
The
show configuration command now correctly displays layer 2 VLAN status after you add a
VLAN interface to
level-2 (PD2-94272213).
NetFlow
If a flow record filter is configured on one port with type “match-all-flows” you can now configure the
same flow filter on other ports (1-7G1D8).
SNMP
The ExtremeWare 7.0.0 MIB now compiles correctly in 3rd party applications (PD2-97119501).
The
disable snmp trap port-up-down all command now operates correctly (PD2-96936507).
Entries in the alarmTable related to SMON, extremeRtStats, and extremeVlanL2Stats are lost after reboot
and no longer create spurious corrupt entries (PD2-91569801).