Specifications

62 ExtremeWare 7.0 Release Notes
Clarifications, Known Behaviors, and Resolved Issues
IS-IS
If you configure IS-IS authentication on a PoS interface, the configuration is now saved after a reboot or
configuration download (PD2-108735813).
If you configure authentication before enabling IS-IS on a VLAN, the VLAN interface is now correctly
authenticated (PD2-108735827).
Issues Resolved in ExtremeWare 7.0.0b61
The following issues were resolved in ExtremeWare 7.0.0b61. Numbers in parentheses are for internal
use and can be ignored.
General
If you unconfigure a software redundant port, the redundant port no longer remains down
(PD2-105118423).
Link transitions no longer generate additional checksum errors when checksum errors have already
been recorded (PD2-104485401).
IPX now operates correctly after upgrading from ExtremeWare 6.2.1 to ExtremeWare 6.2.2
(PD2-83558641).
The output from the
show port configuration command now displays flow control autonegotiation
status correctly (1-5VKAH).
Broadcast storms no longer lock up the management port (PD2-71281360).
Name completion now works correctly with the
show iparp and show ipfdb commands
(PD2-97719004).
Enabled jumbo frame ports are no longer displayed twice in the output of the
show config command
(PD2-94298501).
Upgrading from ExtremeWare 6.1.9 to ExtremeWare 6.2.2 no longer corrupts permanent FDB entries
(PD2-98730521).
False checksum error messages due to a software error when checking for a return code are no longer
displayed to the system log (PD2-108354018).
If you create a tagged VLAN and port, delete the VLAN, and recreate an untagged VLAN and port,
broadcast traffic is now forwarded correctly (PD2-100769947).
The maximum IP-MTU size is now 9194 to fit within the maximum jumbo frame size of 9216
(PD2-105579101).
When a ping is redirected, the statistics for the last packet received are no longer reported as lost (5170).
BlackDiamond
The synchronize command no longer causes the BlackDiamond to crash (PD2-82006728).