Specifications

4 ExtremeWare 7.0 Release Notes
Clarifications and Known Behaviors 33
System Related – All Systems 33
GBIC Type in the show ports configuration Command Output 33
Do Not Telnet to Port 80 and Continuously Press Keys 33
Smart Redundancy Enabled in Saved Configuration 34
Microsoft Load Balancing 34
Telnet and the show ports Command 34
The show configuration Output 34
Configure Slots or VLANs Before Uploading a Configuration 34
LACP not Supported 34
Upgrading to ExtremeWare 7.0 and Bi-Directional Rate Shaping 34
Upgrading to ExtremeWare 7.0 and Debug-Trace 34
Upgrading to ExtremeWare 7.0 and OSPF 34
Routing Traffic Through the MGMT Port 35
Configuring the Timezone 35
Blank Space in show port info detail Command Output 35
Using an ExtremeWare 7.0 Configuration with an Earlier Image 35
Console Response with a Large Number of ARP Entries 35
Configuring 1000Base-T Ports for 10,000 Mbps 35
The show log chronological Command 35
BOOTP-Dependent Routes in Downloaded Configuration not Created 35
Enable Flow Statistics Ping-Checking 35
UDP Echo Transmit Rate 36
The disable learning Command and Flooding 36
Port Mirroring 36
Setting Auto-negotiation Off on a Gigabit Port 36
Enabled IdleTimeouts and Console Connections 36
User Accounts 36
TFTP Download of Configuration Files 36
Port Tag Limitation 36
BlackDiamond 37
MPLS Hello Packets 37
Slot Failure Messages During a Broadcast Storm 37
Hot-Inserting an MSM Disrupts MPLS and ARM Modules 37
No Image Information Reported to SNMP with One MSM 37
MPLS and CPU DoS Protect 37
Duplicate Precedence Rules 37
BlackDiamond 6816 MSM C and D Diagnostics Messages not in Syslog 37
Synchronize a Newly Installed MSM64i 38
Disabling CLI Paging from the Slave MSM64i 38
Limited Commands Mode and the reboot Command 38
The unconfig switch all Command 38
Dynamic Memory Scanning and Mapping Module Support 38
Extended Diagnostics 38
BlackDiamond 6816 MIB Value for Input Power Voltage 39
Backplane Traffic 39
QoS 39
Alpine 39
Alpine 3802 show switch Output Shows Incorrect PSU Placement 39