Specifications

ExtremeWare 7.0 Release Notes 33
4 Clarifications, Known Behaviors, and
Resolved Issues
This chapter describes items needing further clarification, behaviors that might not be intuitive, and
issues that have been resolved since the last release. Numbers in parentheses are for internal reference
and can be ignored.
This chapter contains the following sections:
• “Clarifications and Known Behaviors” on page 33
• “Issues Resolved in ExtremeWare 7.0.1b11” on page 60
• “Issues Resolved in ExtremeWare 7.0.0b68” on page 61
• “Issues Resolved in ExtremeWare 7.0.0b61” on page 62
Clarifications and Known Behaviors
Following are the clarifications and known behaviors in ExtremeWare 7.0.1. For changes made in
previous releases, see the release notes specific to the release.
System Related – All Systems
CAUTION
In order for configuration changes to be retained through a switch power cycle or reboot, you must use
the
save command.
GBIC Type in the show ports configuration Command Output
ZX GBICs are displayed as LX-70 GBICs in the output of the show ports configuration command.
This is a display issue only; the GBICs function correctly (PD2-131305301).
Do Not Telnet to Port 80 and Continuously Press Keys
If you telnet to the switch using port 80 and continuously press keys on your keyboard, the switch
might eventually reboot (on a BlackDiamond switch, the master MSM might fail over to the slave)
(PD2-129688312).