Specifications

ExtremeWare Error Message Decoder Index - 975
EDP checksum failed 592
external checksum error 55
flapping 289
incorrect state 607
insufficient memory 610
internal checksum error 56
invalid path cost 286
invalid PIF 615
invalid secondary port 618
invalid speed 288, 617
link down 639
link speed 287
link state 306, 557
mapping failed 648
message send failed 136
mismatch, delete failed 584
no trunk ID 320
not configured 649
not in VLAN 650
not ready 45, 104
power state change 797
primary, status changed to Blocked 803
primary, status changed to Down 804
primary, status changed to Unknown 829
primary, status changed to Up 805, 806
secondary, status changed to Blocked 816
secondary, status changed to Down 817, 818
secondary, status changed to Init 819
secondary, status changed to Preforwarding 820
secondary, status changed to Unknown 821, 822
secondary, status changed to Up 823, 824, 825
semaphore allocation failed 138
spurious link state 664
state blocked 98
status changed to Up 798
STP disabled 665
unbinding failed 651
untagged STP mismatch 691
up timer creation failed 140
VLAN changed 942
write error 652
POST slot failure 40
Power over Ethernet, see PoE
Power supplies
reserve 868
power supplies
AC and DC 218
AC and DC power supply 216
back to normal 121
consumption exceeds threshold for slot 653
consumption exceeds threshold for system 654
consumption normal for slot 301
consumption normal for system 302
DC and DC-J 217
disconnect,remove 866, 867
failed 122
failure, no backup 99
failure, retry later 100
failure, switching to backup 800
failure, trying again 101
fan failure 194
input failure 195
memory allocation failure 212
mismatch 176, 217
old AC values 793
old and new AC power supply 215
output failed 355
output ready 843
PoE state change 796
port state change 797
PSU installed 854
PSU output failure 853
PSU removed 188, 202
single and dual AC power supply 219
temperature failure 193
unknown type 38
up for slot 799
PPP
link configuration 331, 334
link status message 335
message to card 328
pqmWaitKill failed 943
preforward timer expired 801, 802
PSU, see power supplies
PTAGs
allocation failed 249
already free 657
communication error 944
does not exist 674
invalid 77
invalid entry 44
maximum block allocation 628
no free LIST tags 656
running out of 962
unable to allocate 684
Q
QoS
cannot find entry 663
changing default value 708
duplicate port instance 658
invalid configuration 807
quake
cannot access 294
queue descriptor 102
transient failure 945
R
RADIUS
authentication server 312
server not found 312
RAM request timeout 102
Reboot Loop 539
Recv buffers not empty 946
register failed 104
related publications 34
ring state
break, flush transit FDBs 810
changed to Link-Down 815
Complete 812
Down, flush domain FDBs 811
Up, flush FDB on domain 813
Up, flush Transit FDBs 814
RIP
error sending message 947
packet sanity check failed 809
RIP Route