Specifications

880 ExtremeWare Error Message Decoder
Informational Messages
ESD Stopped
Already stopped
Software Version
ExtremeWare 7.2 and later
Hardware Version
All “i” series
Explanation
This message indicates that the EAPS super domain (ESD) has already been stopped.
You can change the shared ports domain mode from controller to partner or from partner to controller.
When you change the mode or change the link-id, the ESD should be stopped and restarted.
Action
If the ESD is running, ignore this message. Use show eaps command to check the status of EAPS
shared port.
If the EAPS domain is not configured, EAPS shared port will be in down state. Configure the EAPS and
then check the status of the shared port.