Specifications

Writing Runtime Image to Flash
ExtremeWare Error Message Decoder 851
Writing Runtime Image to Flash
A300 connected to wireless port <port> started writing runtime onto flash. DO NOT
DISCONNECT A300 or REMOVE ITS POWER until upgrade completes.
Software Version
ExtremeWare 7.6
Hardware Version
Summit 300-48, Summit 300-24, Summit 400-24p, Alpine
Explanation
The access point (AP) has started to write the runtime image to its flash. Disconnecting the AP or
removing the power supply while writing the image to the flash can corrupt the AP.
Action
Informational only. No action needed.