Specifications

Old Power Supplies
ExtremeWare Error Message Decoder 793
Old Power Supplies
<INFO:SYST> PWR MGMT: System is using Old AC 220 power values: 480, 518, 3, 1001
Software Version
ExtremeWare 6.1.x
Hardware Version
BlackDiamond
Explanation
This message indicates that ExtremeWare implemented power supply checking as part of the
initialization routines. Messages similar to the above will appear in the startup sequence depending on
the type of PSU detected by the system. The phrase “using Old AC 220 power values” simply indicates
the detection of the original 220 PSU (old) as opposed to the new 220 PSU recently released by Extreme.
You might also see messages like:
PWR MGMT: System is using New AC power values:
PWR MGMT: System is using Old AC 110 power values:
PWR MGMT: System is using DC power values:
Action
No action is necessary.