Specifications

DVMRP PDU: Message Queue Send Error
ExtremeWare Error Message Decoder 715
DVMRP PDU: Message Queue Send Error
dvmrpPdu: msgQSend error <errno>
Software Version
ExtremeWare 7.3 and later
Hardware Version
All “i” series and Summit “e” series
Explanation
The message indicates that the switch received a DVMRP packet and while enqueuing the DMVP
packet to the DVMRP message, the message queue failed.
This error would occur when a DVMRP packet is received and enqueueing the DVMP packet to the
DVMRP message queue fails.
Action
1 Disable DVMRP and enable it after some time.
2 If you see this message again, disable and also remove the vlans from DVMRP. After some time,
enable and add the vlans to DVMRP.
3 If you see this message even after removing and adding the VLANs, reboot the switch.