Specifications

714 ExtremeWare Error Message Decoder
Warning Messages
TFTP Errors on Port
Too many TFTP tries made for port 1:1. Sending out trap and moving port to ERR
state.
Software Version
ExtremeWare 7.6
Hardware Version
Summit 300-48, Summit 300-24, Summit 400-24p, Alpine
Explanation
While the access point (AP) tried to get the image from the server, TFTP failed due to one of the
following reasons:
• Unknown Host
• Server not reachable
• TFTP general error
• Checksum failed
If TFTP access fails five times continuously, the switch moves the wireless port to the ERR state and
generate a trap.
Action
1 Confirm that the file you are trying to transfer is in TFTP server.
2 Confirm that the access point is connected to the TFTP server.
3 Veri fy the log.
4 Fix the errors.
5 Disable and re-enable the port.
6 Upgrade or boot up the AP image.