Specifications

Bootstrap and Bootloader Not Configured
ExtremeWare Error Message Decoder 713
Bootstrap and Bootloader Not Configured
AP with 1.52 bootrom is connected to the port=1:1. Configure both bootstrap and
bootloader.Sending out trap and moving port to ERR.
Software Version
ExtremeWare 7.6
Hardware Version
Summit 300-48, Summit 300-24, Summit 400-24p, Alpine
Explanation
The bootstrap version of the access point (AP) connected to port 1:1 is 1.5.2.
You are trying to upgrade either the bootstrap or the bootloader. The switch has moved the wireless
port to the ERR state and has sent a trap.
This message is displayed when you try to upgrade only the bootstrap or the bootloader. Upgrading the
bootstrap or the bootloader without upgrading the other corrupts the access point. To prevent the AP
from getting corrupted, the switch moves the wireless port to the ERR state.
Action
Configure both the bootstrap and the bootloader.