Specifications

704 ExtremeWare Error Message Decoder
Warning Messages
Too Many Announcements on Port
port=<%d> has receive too many Announce
Software Version
ExtremeWare 7.3 and later
Hardware Version
Alpine, Summit300-24, Summit300-48, and Summit400-24p
Explanation
The switch has received too many announce messages from the access point (AP).
If the switch receive too many announce messages from the access point, the access point will be moved
to ERR state.
This could be due to errors in the wireless configuration.
Action
1 Verify the wireless configuration and confirm that the configuration is correct.
2 Disable and enable the wireless port.
3 If you see the message again, contact Technical Support.