Specifications

70 ExtremeWare Error Message Decoder
Critical Messages
Hardware Failure, Attempting to Initiate Corrective Action
<CRIT:SYST> Sys-health-check [ACTION] (PBUS checksum)
(CARD_HWFAIL_PBUS_CHKSUM_EDP_ERROR) M-BRD
Software Version
ExtremeWare 7.2 and later
Hardware Version
All
Explanation
The motherboard on the Summit switch detected a EDP checksum error in the PBUS system of the
Motherboard, causing a failure.
This is a corrective action message. It is to alert the user that, if a corrective action was configured, it
will take action now. If no corrective action was configured, then nothing happens.
Action
Informational only. No action needed.