Specifications

676 ExtremeWare Error Message Decoder
Warning Messages
Stuck Interrupt
<WARN:PORT> ERROR: Slot 1 indicates a stuck interrupt, disabling interrupts to the
blade
Software Version
ExtremeWare 6.1.9 and later
Hardware Version
BlackDiamond
Explanation
This message indicates that on the slot there is no interrupt between the MSM and the module;
therefore, stuck interrupt occurs. The software disables the further interrupts and brings the module
down.
Action
Re-insert the particular module in that slot.
If the re-insertion of the module does not fix the problem contact Technical Support.