Specifications

648 ExtremeWare Error Message Decoder
Warning Messages
Port Mapping Failed
<WARN:SYST> processCardNmcConnectionDown: set nmc (11) channel (1) internal loop error
<WARN:PORT> port mapping failed on slot 12 internal port 2!
<WARN:PORT> port mapping failed on slot 12 internal port 2!
<WARN:SYST> processCardNmcConnectionDown: set nmc (10) channel (1) internal loop error
<WARN:PORT> port mapping failed on slot 11 internal port 2!
<WARN:PORT> port mapping failed on slot 11 internal port 2!
<INFO:SYST> Card removed from slot 2
Software Version
ExtremeWare 6.x
Hardware Version
BlackDiamond
Explanation
These messages indicate that removing a module from slot 2 causes the switch to set the connection of
MSM A and MSM B to slot 2 as an internal loop. But the software failed to set the MSM A (slot 11 - 1
based, nmc (10 - 0 based)) and the MSM B (slot 12 - 1 based, nmc (11 - 0 based)) port to the internal
loop.
Action
No action is necessary.