Specifications

628 ExtremeWare Error Message Decoder
Warning Messages
Maximum Block Allocation
<WARN:HW> tBGTask: Reached maximum otp block allocation for MSM-A
<WARN:HW> tBGTask: Reached maximum otp block allocation for slot 1
Software Version
All ExtremeWare versions
Hardware version
All except VDSL
Explanation
These messages indicate that the system is out of PTAG blocks. This can happen if you configure a
large number of multicast groups, VLANs, etc.
NOTE
The system can have a maximum of 6,000 PTAG blocks. Each PTAG can have up to 7 ports; therefore,
any configurations that use large amounts of PTAGs can cause these error messages.
Use the show or show igmp snooping vlan <vlan name> detail commands to verify whether
PTAG blocks have depleted.
Action
Contact Technical Support to check the configuration.