Specifications

626 ExtremeWare Error Message Decoder
Warning Messages
MAC Chip
<WARN:PORT> write content of VlanCmp table index 13 error on slot 2 port 24
<WARN:PORT> MAC Chip of slot 6 port 18 is not ready
<WARN:PORT> read content of VlanCmp table index 2 error on 8
Software Version
ExtremeWare 6.x
Hardware Version
Alpine and BlackDiamond “i” series
Explanation
These messages indicate that there might be a hardware problem. The I/O modules were not ready to
receive packets.
Action
If this occurs within a minute after bringing up the module, no action is necessary.
If not, check the system configuration and hardware, and run diagnostics on the switch. If the error
continues to appear, RMA the affected modules.