Specifications

616 ExtremeWare Error Message Decoder
Warning Messages
Invalid Port Cost
<WARN:KERN> pifChangeStpPathCosts: Invalid cost for port 0x8e5b2b50(44)
<WARN:STP> stpPortDefaultPathCost: Invalid port speed for pif 0x8e5b2b50 port 1:45
Software Version
ExtremeWare 6.x
Hardware Version
All “i” series
Explanation
These messages indicate that there is some invalid port information.
Even if STP is not enabled, the STP task still checks all of the port parameters. Therefore, if there are
any misconfigured slot or port parameters, you will get this message.
Action
Use the show slot command to determine the misconfiguration and correct accordingly.