Specifications

Exceeded Committed-Rate Condition Set
ExtremeWare Error Message Decoder 597
Exceeded Committed-Rate Condition Set
<WARN:PORT> Exceeded committed-rate condition set, port 1:1 queue IQP1
Software Version
ExtremeWare 7.2.0 and later
Hardware Version
BlackDiamond and Alpine High-Density Gigabit Ethernet modules (G16X3, G24T3, GM-16X3, and
GM-16T3)
Explanation
This message indicates that the configured maximum ingress committed-rate has been exceeded for the
indicated port and queue. This means that traffic is coming into an ingress queue at a faster rate than is
guaranteed. This traffic is in danger of being dropped, depending on the ingress rate for other queues
on the same port and other ports in the same oversubscription group.
Action
Use the show port 1:1 ingress stats detail command to view the measured ingress statistics on
all the queues for the selected port (see the ExtremeWare Command Reference Guide to understand the
output). Use the
config qosprofile ingress command to alter the committed ingress rates, if
desired.