Specifications

596 ExtremeWare Error Message Decoder
Warning Messages
Exceeded Committed-Rate Condition Clear
<WARN:PORT> Exceeded committed-rate condition clear, port 1:1 queue IQP1, reporting
4196 bytes
Software Version
ExtremeWare 7.2.0 and later
Hardware Version
BlackDiamond and Alpine High-Density Gigabit Ethernet modules (G16X3, G24T3, GM-16X3, and
GM-16T3)
Explanation
This message indicates that the configured maximum ingress committed-rate is no longer being
exceeded for the indicated port and queue. This means that traffic is now coming into the ingress queue
at a rate that is guaranteed and will not be dropped during ingress.
Action
Action may not be required because the excessive ingress traffic condition is no longer active. Use the
show port 1:1 ingress stats detail command to view the measured ingress statistics on all the
queues for the selected port (see the ExtremeWare Command Reference Guide to understand the output).
Use the
config qosprofile ingress command to alter the committed ingress rates, if desired.