Specifications

588 ExtremeWare Error Message Decoder
Warning Messages
Dropped Bytes Condition Clear
<WARN:PORT> Dropped bytes condition clear, port 1:1 queue IQP1, reporting 539072 bytes
Software Version
ExtremeWare 7.2.0 and later
Hardware Version
BlackDiamond and Alpine High-Density Gigabit Ethernet modules (G16X3, G24T3, GM-16X3, and
GM-16T3)
Explanation
This message indicates that ingress traffic is no longer being dropped on the indicated port and queue.
The previous condition was due either to the configured maximum ingress peak-rate being exceeded or
congestion due to excessive traffic on other ports in the same oversubscription group.
Action
Action may not be required because the excessive ingress traffic condition is no longer active. Use the
show port 1:1 ingress stats detail command to view the measured ingress statistics on all the
queues for the selected port (see the ExtremeWare Command Reference Guide to understand the output).
Use the
show ports <portlist> utilization command to view the ingress rates on ports in the
same oversubscription group to determine if discards are due to oversubscription congestion.
If the discards are due to rate-limiting, use the
config qosprofile ingress command to alter the
peak ingress rates, if desired.
If the discards are due to oversubscription congestion from other ports, consider spreading out the
highest traffic ports to different oversubscription groups.