Specifications

Diagnostic Failure, Port Invalid Speed
ExtremeWare Error Message Decoder 585
Diagnostic Failure, Port Invalid Speed
<WARN:KERN> pifQBw2PqmBw: Invalid speed 0
<WARN:DIAG> Port 44 Failed IP Route loop back test
<WARN:DIAG> Packet received from port 45 rather than from port 44
Software Version
ExtremeWare 4.x
Hardware Version
All
Explanation
These messages indicate that the port failed diagnostics; therefore, it is a hardware problem. The invalid
speed messages can be from a load-sharing configuration or due to the fact that ExtremeWare could not
identify the ports correctly.
Action
Check hardware and replace as necessary.