Specifications

570 ExtremeWare Error Message Decoder
Warning Messages
card_db.c Module Memory Defect
<WARN:SYST> card_db.c 821: Card 2 has nonrecoverable packet memory defect
<WARN:SYST> card_db.c 832: Card 2 is back online
Software Version
ExtremeWare 6.2.2 and later
Hardware Version
Alpine and Summit
Explanation
These messages indicate that the memory mapping feature found memory defects.
During the check, the software allows the switch to work normally with eight or less defects by
mapping around the bad sections.
If the software finds eight or more errors, the module remains online according to the default setting.
NOTE
You can check your configuration setting using the sh sw command. If sys health-check is enabled
and is set to
alarm level-log , you are using the default setting.
Action
Contact Technical Support to troubleshoot the problem.