Specifications

Bracket Buffer Full
ExtremeWare Error Message Decoder 559
Bracket Buffer Full
<WARN:SYST> addToBracketBuffer: Bracket buffer full
Software Version
ExtremeWare 7.1.1 and later
Hardware Version
BlackDiamond with MSM-3 module
Explanation
This message indicates that the message queue is full on the slave MSM-3 that receives configuration
information from the master MSM-3 when Hitless Failover is enabled. This means that some of the
configuration was not successfully transferred to the slave MSM-3.
Action
Use the configure msm-failover slave-config flash command followed by the configure
msm-failover slave-config inherited
command to recover. These commands clear the receive
buffer and causes the configuration information to be resent to the slave.