Specifications

Wrong Bridge Interface Status
ExtremeWare Error Message Decoder 525
Wrong Bridge Interface Status
EAPS Shared-port 1:1: Segment 2:1 status is %s. Bridge-interface status is %s. Should
have been %s
Software Version
ExtremeWare 7.2 and later
Hardware Version
All “i” series
Explanation
The message indicates that the bridge interface is in blocked, active open, or unknown state; instead of
being in open state.
This might occur in the controller, if the segment was down and the port state has moved to down.
Action
1 Check the bridge status in ESD.
2 Disable and enable the shared port.