Specifications

Wrong Bridge-Interface State
ExtremeWare Error Message Decoder 523
Wrong Bridge-Interface State
EAPS Shared-port 1:1 - Segment-port interface 2:1, vlan %s, should not have
bridge-interface in state %s
Software Version
ExtremeWare 7.2 and later
Hardware Version
All “i” series
Explanation
The message indicates that the VLAN has got a bridge-interface in wrong state. This happens when the
segment up event occur and the controller is in blocking mode; the segment status is blocking; and the
bridge interface status is not in blocking or active open.
Action
1 Check the bridge status in ESD (EAPS super domain).
2 Disable and enable the shared port.