Specifications

522 ExtremeWare Error Message Decoder
Error Messages
Wrong Bridge-Interface Status
EAPS Shared-port 1:1 - Segment port 2:1. Bridge-interface status should not have been
%s
Software Version
ExtremeWare 7.2 and later
Hardware Version
All “i” series
Explanation
The message indicates that the bridge-interface is in a wrong state. This could happen during a segment
up event, if the controller is in blocking mode; segment status is down, and the bridge interface status is
in blocking state.
Action
1 Check the bridge status in ESD (EAPS super domain).
2 Disable and enable the shared port.