Specifications

ExtremeWare Error Message Decoder 51
3 Critical Messages
Critical messages indicate problems that require corrective action.
Check the “Issues Resolved In” sections in the latest ExtremeWare Installation and Release Notes to see if
the error message indicates an issue that has been corrected in a recent software release.
Calibration Required, Programming Failure
Slot X requires PoE calibration - programming failure
Software Version
ExtremeWare 7.2.0bx
Hardware Version
FM32P modules only
Explanation
This message indicates that an attempt to program the firmware with calibration values failed. Without
proper calibration values, the port may have problems detecting a powered device.
Action
RMA the blade.