Specifications

486 ExtremeWare Error Message Decoder
Error Messages
Diffserv Examination: Resources Not Enough
ERROR: not enough resources to enable diffserv examination on ports specified
Software Version
ExtremeWare 7.3 and later
Hardware Version
All
Explanation
This message appears while enabling DiffServ examination on all ports.
DiffServ examination use 64 rules per port. On Summit 200 and Summit 300 switches, 256 rules are
shared among a block of eight 10/100 ports. For each block of 8 ports you can enable a maximum of 3
ports of DiffServ examination. Even though 4 ports can use 256 rules, you can configure only 3 ports
per block of 8 because the ExtremeWare system rules use some of the 256 rules.
Action
For each block of 8 ports you can enable a maximum of 3 ports for DiffServ examination.