Specifications

Could Not Allocate Memory
ExtremeWare Error Message Decoder 433
Could Not Allocate Memory
• Could not malloc gipCfgOptionsPtr
• Could not malloc gipCfgOptionsPtr->vlanName
• Could not malloc gselectedDvmrpVlansPtr->vlanName
• Could not malloc gselectedDvmrpVlansPtr->vlanName[]
• Could not malloc gselectedOspfVlanAreasPtr
• Could not malloc gipCfgOptionsPtr->vlanName[]
Software Version
ExtremeWare 7.3, ExtremeWare 7.4, ExtremeWare 7.5
Hardware Version
All
Explanation
The message indicates that the switch is running out of memory and the switch was not able to allocate
memory of the task.
Action
Reboot the switch. Check whether the problem exists.
If the problem appears again, contact Technical Support.