Specifications

426 ExtremeWare Error Message Decoder
Error Messages
AP Returned Non-existent VLAN ID
AP returned a non-existent VLAN id
Software Version
ExtremeWare 7.3 and later
Hardware Version
Altitude 350, Altitude 350-2, and Summit WM series
Explanation
The message indicates that the VLAN ID, specified in the GetRequest or Response, was not found on
the switch.
Action
1 Check the SNMP Request and Response.
2 Verify the VLAN Configuration on the switch and make sure you have configured the VLAN and
have enabled it.