Specifications

Enabling and Disabling Auto Polling: Card Not Active
ExtremeWare Error Message Decoder 369
Enabling and Disabling Auto Polling: Card Not Active
ERROR: Slot 8 port 21 MII write failed to complete.
Software Version
ExtremeWare 6.2 and later
Hardware Version
BlackDiamond, Alpine
Explanation
While enabling or disabling the auto polling on MAC ASIC, the card in slot 8 was not active. When
auto-polling is enabled, MAC ASIC will use MII bus.
The switch will take the action configured using
sys-health-check. If you have configured
sys-health-check to shut the card, the card is set to non-operational.
Action
Run diagnostics to get the details on the hardware. Reset the card. If the problem persists, contact
Technical Support.