Specifications

Send Slave Config Length Error
ExtremeWare Error Message Decoder 303
Send Slave Config Length Error
<ERROR:SYST> sendSlaveCfgDb: Save fn.for EAPS returns 8. Max.possible length = 4
Software Version
ExtremeWare 7.1.1 and later
Hardware Version
BlackDiamond with MSM-3 module
Explanation
This message indicates that a benign internal software error occurred during configuration transfer
while Hitless Failover was enabled. Because the software recovers automatically from this error, no
problematic behavior is seen.
Action
No action is necessary because problem recovery is automatic.