Specifications

278 ExtremeWare Error Message Decoder
Error Messages
Committed Rate Exceeded for Port
ERROR: max allowable committed-rate exceeded for port 1:1
Software Version
ExtremeWare 7.1.0 and later
Hardware Version
BlackDiamond and Alpine High-Density Gigabit Ethernet modules (G16X3, G24T3, GM-16X3, and
GM-16T3)
Explanation
This message indicates that the maximum allowable ingress committed-rate for the indicated port will
be exceeded if the attempted ingress QoS configuration is allowed. The sum of the committed rate and
the equivalent rate for the configured minbw percent for all ingress queues on a port must not exceed
250 mbps for 4:1 oversubscribed platforms (GM-16T3, GM-16X3, and G24T3) and 500 mbps for 2:1
oversubscribed platforms (G16X3).
Action
Run the show qosprofile ingress <portlist> command to view the configured ingress rates on all
the queues for the selected ports. Then run the
config qosprofile ingress command to assign
ingress rates as desired.