Specifications

System Health Check: Bad SNAP
ExtremeWare Error Message Decoder 245
System Health Check: Bad SNAP
Sys-health-check [EDP] bad SNAP (%x, %x) %s, port 0x%x",
hdr->llcSnap.type, ntohs(EDP_SNAP_ID), slotName(rootSlot), portNum)
Software Version
ExtremeWare 7.4, ExtremeWare 7.5
Hardware Version
All
Explanation
The message indicates that the EDP packet received has a wrong SNAP type. The log displays the slot
and port numbers on which the wrong EDP packet was received.
Action
1 Find the device that is transmitting the wrong EDP packet.
2 Run the diagnostics to verify whether the hardware is in good condition.
3 If you find issues with the hardware, replace it.
If the problem appears again, contact Technical support.