Specifications

244 ExtremeWare Error Message Decoder
Critical Messages
System Health Check: Bad Length
Sys-health-check [EDP] bad length (%x, %x) %s, port 0x%x",
pdu->length, packetlength, slotName(rootSlot), portNum);
Software Version
ExtremeWare 7.4
Hardware Version
All
Explanation
The message indicates that the switch has received an EDP packet with wrong length. The log displays
the slot and port numbers on which the EDP packet was received.
Action
1 Find the device that is transmitting the wrong EDP packet.
2 Run the diagnostics to verify whether the hardware is in good condition.
3 If you find issues with the hardware, replace it.
If the problem appears again, contact Technical support.