Specifications

Write to NVRAM Failed
ExtremeWare Error Message Decoder 119
Write to NVRAM Failed
Cannot write to the NVRAM ELRP Client defaults
Software Version
ExtremeWare 7.3 and later
Hardware Version
All
Explanation
The switch failed to write ELRP client defaults to the NVRAM or Flash.
The error could be due to one of the following reasons:
• Flash not ready.
• Object was not found on NV config.
• Object not writable.
Action
Verify the logs for more information.
Retry the command.
If problem persists, contact Technical Support.