Specifications

ExtremeWare Error Message Decoder 11
Contents
Login Failed 290
Messages from Interrupt Level Lost 291
No 802.1q Tag 292
No PIF for BIF 293
Packet Send Buffer Failed 294
PBUS CRC Error 295
PoE Firmware Invalid on Blade 296
PoE Firmware Invalid on Slot 297
PoE Hardware Problem, Disabling PoE on Port 298
PoE Not Operational 299
Port in 802.1d Mode Already Exists 300
Power Consumption Normal for Slot 301
Power Consumption Normal for System 302
Send Slave Config Length Error 303
Unable to Allocate Memory, STPD Bridge List 304
VDSL vPowRead 305
VDSL Reduced Mode 306
VLAN ID Conflict 307
VLAN Not in STPD 308
GPP Initialization Error 309
TACACS Server Not Configured for Session 310
Unsupported Data Type 311
RADIUS Authentication Server Not Found 312
No MAC Entries Available on lkup Table 313
Cannot Create Permanent Entry with MAC Address 314
sysObjSetStpd Returned Error for StpBridgePriority 315
sysObjSetStpd Returned Error for dot1dStpBridgeHelloTime 316
sysObjSetStpPort Returned Error for dot1dStpPortPriority 317
sysObjSetStpPort Returned Error for dot1dStpPortPathCost 318
Failed to Send Timer Tick to DLA Task 319
No Trunk ID for Port 320
Auto Diagnostic Running While Timer Expiry 321
Cable Diagnostic Module Management Queue Failed 322
Cable Diagnostic Module Message Queue Failed 323