User guide

E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
7-9
M
ODIFYING A
Q
O
S P
ROFILE
Figure 7-5:
The Modify QoS Profile dialog box
The existing QoS profiles, including the four default profiles, are displayed in the
QoS Profiles list.
2 To change the profile priority, select a different priority (Low, Normal, Medium, or
High) from the drop down list in the Priority field. Note that you cannot change the
priority of the default QoS profiles.
3 To change the minimum bandwidth, type a new value into the Minimum
Bandwidth field. The value must be between 0 and 100, and less than or equal to the
value in the maximum bandwidth field.
4 To change the maximum bandwidth, type a new value into the Maximum
Bandwidth field. The value must be between 0 and 100, and greater than or equal to
the bandwidth specified in the minimum bandwidth field.
5 When you have finished filling out the fields, click the Apply button to replace the
profile in the set of available QoS Profiles.
At any time before you click Apply, you can click Reset to undo all the values you have
entered.
When you modify a QoS profile, the profile is updated in the database, and also on all
switches where it currently exists.