User guide

E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
7-7
D
ELETING A
Q
O
S P
ROFILE
3 Type a value for minimum bandwidth into the Minimum Bandwidth field. The
value must be between 0 and 100, and less than or equal to the value you plan to
use for maximum bandwidth.
4 Type a value for maximum bandwidth into the Maximum Bandwidth field. The
value must be between 0 and 100, and greater than or equal to the minimum
bandwidth specified in the previous field.
5 When you finish filling out the fields, click the Apply button to add the new profile
to the set of available QoS Profiles. Your profile appears in the QoS Profiles list.
At any time before you click Apply, you can click Reset to undo all the values you have
entered.
The profile is added to the ExtremeWare Enterprise Manager database. It is not created
on any switch at this time. It is created on a switch only when a policy is defined for a
VLAN on that switch that uses the new QoS profile.
D
ELETING A
Q
O
S P
ROFILE
If you have Administrator or Manager access, you can delete custom QoS profiles, and
remove them from the set of profiles available within the ExtremeWare Enterprise
Manager environment.
If a profile is in use, you will not be able to remove it. You need to change the QoS
policy for any VLANs that use the profile before the Enterprise Manager will allow it to
be deleted.
You cannot delete the four default profiles, QP1, QP2, QP3, or QP4.
To delete a custom QoS profile, follow these steps:
1 Click the Delete button at the top left of the Quality of Service Manager window.
The Delete QoS Profile dialog box appears, as shown in Figure 7-4.