User guide

E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
6-11
A
DDING AND
D
ELETING
P
ROTOCOL
F
ILTERS
8 Click Tagged to add the port as a tagged port. Click Untagged to add the port as an
untagged port.
If this is an untagged VLAN, you will not be able to add a port as a tagged
port.
If a port is added as an untagged port, it is automatically removed from any other
VLAN which uses the same protocol as the new VLAN, and where the port is an
untagged member.
You can add a switch to a VLAN without selecting any ports—just select the switch
without selecting any ports, and click Tagged or Untagged to add the switch to the
VLAN.
9 When you have finished adding and removing ports, click Apply to have the
changes take effect.
If all ports of a switch are removed from the VLAN, the VLAN is deleted from that
switch.
If a port on a new switch is added to the VLAN, then the VLAN is created on that
switch.
A
DDING AND
D
ELETING
P
ROTOCOL
F
ILTERS
Users with Administrator or Manager access can view, add, and delete protocol filter
definitions. If you have Monitor access, you can view filter definitions, but not add or
delete them.
To view, delete or add protocol filter definitions, do the following:
1 Click Protocol Filters in the VLAN Manager.
The View/Delete page of the Protocol Panel dialog box is displayed, as shown in
Figure 6-8.