User guide

6-10 E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
U
SING THE
VLAN M
ANAGER
Figure 6-7:
The Modify VLAN dialog
2 Select a VLAN from the drop-down list in the VLAN Name field.
The current values for the VLAN are displayed.
The
Ports in VLAN
list does not display SummitLink ports, because you
cannot modify them.
3 To change the Protocol Filter selection, select a different entry from the pull-down
Protocol Filter list.
4 To change the VLAN tag, type a new value into the Tag field.
To disable tagging for the VLAN, type “untagged” or 0 (zero) into the Tag field.
5 To remove a port from the VLAN, select the port in the Ports in VLAN list, and click
Remove.
6 To add a port to the VLAN, first select the switch from the Available Switches list.
This displays a list of ports on the switch that are available to be included in the
VLAN.
The
Available Ports
list does not include ports in SummitLink mode, or ports
configured as slave load sharing ports.
7 Select a port from the Available Ports list.