User guide

6-8 E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
U
SING THE
VLAN M
ANAGER
If this is an untagged VLAN, you will not be able to add a port as a tagged
port.
If a port is added as an untagged port, it is automatically removed from any other
VLAN which uses the same protocol as the new VLAN, and where the port is an
untagged member.
You can add a switch to a VLAN without selecting any ports—just select the switch
without selecting any ports, and click Tagged or Untagged to add the switch to the
VLAN.
8 To remove a port from the VLAN, select the port from the Ports in VLAN list, and
then click Remove.
9 When you have finished adding ports to the VLAN, click Apply to have the changes
take effect.
The VLAN is created on the switches whose ports are members of the new VLAN.
D
ELETING A
VLAN
Users with Administrator or Manager access can delete VLANs from the Summit
switches managed by the ExtremeWare Enterprise Manager. If you have Monitor access,
you will not be able to use this function.
To delete a VLAN, follow these steps:
1 Click the Delete button in the VLAN Manager panel.
The Delete VLAN dialog is displayed, as shown in Figure 6-6.