User guide

E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
6-7
A
DDING A
VLAN
Figure 6-5:
Add VLAN dialog
2 Enter a descriptive name for the VLAN. The name must begin with a letter followed
by up to 31 characters. See the Summit Switch Installation and User Guide for details
on VLAN naming.
3 Select an entry from the pull-down Protocol Filter list. This selection determines
what protocol (if any) is used to determine membership in this VLAN. If you do not
want to specify a protocol, select ANY. This means the filtering rules will match all
unfiltered protocols.
4 If the VLAN is to be tagged, enter a 802.1Q tag value in the Tag field. The tag value
can be a number between 2 and 4095. By entering a tag number, you enable tagging
for this VLAN. Enter the text “untagged” or 0 (zero) to indicate that the VLAN is to
be untagged.
5 To add a port to the VLAN, first select the switch from the Available Switches list.
This displays a list of ports on the switch that are available to be included in the
VLAN.
The
Available Ports
list does not include ports in SummitLink™ mode, or
ports configured as slave load sharing ports.
6 Select a port from the Available Ports list.
7 Click Tagged to add the port as a tagged port. Click Untagged to add the port as an
untagged port.