User guide

5-8 E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
P
OPULATING THE
E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
D
ATABASE
also removes all information about VLANs, QoS, and Virtual Chassis connections
associated with this switch from the Enterprise Manager database.
Deleting a switch from the Enterprise Manager has no effect on the actual switch
itself.
Users with Administrator or Manager access can delete switches from the ExtremeWare
Enterprise Manager database. If you have Monitor access only, you can not access this
function.
To delete switches from the Enterprise Manager database, follow these steps:
1 Select one or more switches in the All Summit Devices list from the top level
Inventory Manager page.
2 Click Delete.
3 Click OK to confirm that you want to delete the switch information from the
database.
U
PDATING
S
WITCH
I
NFORMATION
Occasionally, you may want to update the configuration and status information for a
switch in the ExtremeWare Enterprise Manager database. The Sync operation is a
manual update you can use if you feel that the switch configuration is not correctly
represented in the Enterprise Manager applets. It updates all information for a selected
switch except for the contact information.
If you have Administrator or Manager access to the Enterprise Manager, you can
perform a Sync. If you have Monitor access only, you can not use this function.
To refresh the configuration and status information, follow these steps:
1 Select one or more switches in the All Summit Devices list from the top level
Inventory Manager page.
2 Click Sync.
The Inventory Manager uses SNMP to retrieve configuration and status information
from each selected switch, and updates the database with that information.
3 The Sync function displays a dialog box with status or error information. Click OK
to continue.