User guide

E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
5-7
D
ELETING A
S
WITCH FROM THE
D
ATABASE
The Modify function is available only from the Inventory Manager main window when
the top-level Switches summary is selected. Users with Administrator or Manager
access can modify the switch contact parameters. If you have Monitor access only, you
can not use this function.
To modify the switch contact information for a Summit switch in the database:
1 Click Modify in the Inventory Manager panel.
The Switch Contact Information dialog, as shown in Figure 5-4, is displayed,
showing the information currently in the database for the selected switch.
Figure 5-4:
Switch Contact Information dialog for modifying switch information
2 Enter the changed information in the appropriate fields.
3 Click Reset to change the fields back to their original values.
4 Click Apply to add the changed information to the ExtremeWare Enterprise
Manager database.
5 Click Cancel to cancel the Modify process.
When you click Apply, the Inventory Manager updates the information about the
switch in the database.
D
ELETING A
S
WITCH FROM THE
D
ATABASE
Deleting a switch removes the information about the switch from the Enterprise
Manager database. This means that the switch can no longer be monitored and
managed from the ExtremeWare Enterprise Manager application. Deleting a switch
removes any SmartTraps rules, both from the database and the switch change table. It