User guide

4-2 E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
A
DMINISTERING THE
E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
The Enterprise Manager as installed provides two default users, “admin” with
Administrator access, and “user” with Monitor access. The two default users do not
initially have passwords. All other user names must be added and enabled by an
Administrator user.
Regardless of your access level, you can run the Administration applet and change your
own password. Users with Administrator access can add and delete users and assign
user access levels.
S
TARTING THE
E
NTERPRISE
M
ANAGER
C
LIENT FOR THE
F
IRST
T
IME
The two default users, admin and user, do not initially have passwords.
It is strongly recommended that you log in the first time with the user name admin,
and immediately change the admin user password. You can then add other users with
Manager, Monitor or Administrator access.
To run the ExtremeWare Enterprise Manager client interface for the first time:
1 Launch your Web browser.
2 Enter the URL
http://< host >: <port >/
In the URL, replace <host> with the name of the system where the ExtremeWare
Enterprise Manager server is running. Replace
<port> with the TCP port number
that you assigned to the ExtremeWare Enterprise Manager Web Server during
installation.
If you used the default web server port, 80, you do not need to include the
port number.
The Enterprise Manager Start-up page appears.
3 Launch the Enterprise Manager.
The Enterprise Manager Login page appears.
4 Type the user name
admin in the User field.
5 Leave the Password field empty.
6 Click Login.